Series Serie 338XX43
Air-oil modulable progressive distributor
Serie 338XX43
Aplications
- Distributions of lubrication in industrial machinery, such as roller conveyors, straightening machines or cushions.
- Installations in the paper industry, steelworks, and quarries can be used this type of products with high guarantees of a suitable lubrication
Features
- Modular design
- High versatility
- Progressive and uniform lubrication
- Rugged body in EN 10087-11SMnPb30
- Large greasing capacity, progressive between 6 and 16 outlets
Description
This progressive air-oil distributor has a mixing plate attached to our distributor ref. 337XX43.
The progressive distributors are piston type, which make a clean and exact distribution of lubricant.
The progressive distributor takes its name because the supply of lubricant to the lubrication points occurs in progressive order.
This progressive offers a high versatility due to its modular design, it allows to exchange the lubrication modules according to the amount of lubricant required, allowing in a single equipment to have several ranges of flow.
The entry and exit of the lubricant is made from the progressive distributor ref. 337XX43, while the air inlet and the outputs of the air-oil mixture are made in the lower mixing plate 338XX43, upon entering the lubricant acts on the first piston causing the movement of it, which forces the displacement of the following pistons, providing flow to the mixing plate and therefore to the outputs, causing their progressive and continuous movement as long as there is lubricant input from the entrance.
The blockage of a single piston due to lack of lubricant, entails blocking the entire distributor. The solution simply consists of adding a detection system in a single plunger to be able to control all the progressive one.
Installation
Always need to be installed in a progressive pumping system, either primary or secondary distribution, the input of lubricant can be done from a pump under pressure or from another progressive, when acting as a secondary progressive, distributing proportionally the flow received between the outputs enabled . The outputs are enabled from inside, bloking the outputs that do not interest.
Specifications
Número de salidas | De 6 a 16 |
Caudal de salida por embolo | Desde 0.09 cm3 a 1.1 cm3 |
Presión mínima de trabajo | 10 bar |
Presión máxima de trabajo | 200 bar |
Conexión de entrada | 1/4” bsp |
Conexiones de salida | 1/8” bsp |
Calidades | Cincado ISO 2081 – Fe/Zn12/A |
Order information
Nº outputs Weight A B C | Reference for mixing plate
|
6 (3+3 ) 2.2 Kg 120 105 129 | 3380643 |
8 (4+4 ) 2,6 Kg 145 130 154 | 3380843 |
10 (5+5 ) 3 Kg 170 155 179 | 3381043 |
12 (6+6 ) 3,3 Kg 195 180 204 | 3381243 |
14 (7+7 ) 3,7 Kg 220 205 229 | 3381443 |
16 (8+8 ) 4,1 Kg 245 230 254 | 3381643 |
( * ) ( See Figure 1 ) | |
Specifications | Reference for mixing plate Ouput options |
Distributor model | 3 3 8 X X 4 3 X |
Output options : | |
Free piston option | A |
Right half-closed piston option | B |
Left half-closed piston option | C |
Accesories
Specificacions | Reference |
Weldable support | 3236019 |
Modulable progressive distributor | 337XX43 |
2 outlets union | 3380012 |
3 outlets union | 3380013 |
Order example Reference
Progressive distributor of 6 outlets with : | |
First piston with option of outlets A | |
Second piston with option of outlets B | |
Third piston with option of outlets A |
3380643-A-B-A |
Note: This air-plate must always be connected with our progressive 337XX43.
Other products
We will get back to you within 24 hours
Do you have any questions? Are you ready to buy? Your Nortek assistant is ready to help you
Success stories
We are your reliable partner to make everything flow and nothing stands still.
Leave the fluid management of all your machines in our hands so that they always work at 100%, increase their performance and extend their service life. It’s time to stop worrying about the performance of your machinery.
Discover how our solutions have delivered great results