Series 3117XX3XX
Single line air-oil dispenser
Series 3117XX3XX
Applications
- This type of dosing unit with decompression is suitable for installations with light oils and for applications in bearings at high speeds.
Features
- Body Material EN 573-3 – AW-Al Cu4PbMg
- Block design to avoid leakage.
- High performance
- From 3 to 6 outlets
- Adjustable air flow
| Max. operating air pressure | 10 bar |
| Min. operating pressure air | Output pressure + 1 bar |
| Max. operating oil pressure | 45 bar |
| Min. operating oil pressure | Output pressure + 20 bar |
| Oil discharge pressure | < 1.2 bar |
| Fluid | Mineral oil |
| Viscosity | Up to 3000 cSt. According to temperature |
| Temperature range | -20ºC. / +80ºC. |
| Up to 5ºC. max. oil viscosity can be used | ISO VG 100 |
| Air inlet | 1/4 “bsp |
| Oil inlet | 1/4 “bsp |
| Exits | 1/8 “bsp |
Description
These dispensers are specially designed lubrication elements for single line air-oil systems.
Installation
There are two types of installation possibilities for this dispenser.
- Parallel installation
This is the most common installation, the dispensers are connected independently to the main lines. It is necessary to take into account the air purge in this installation, the air seal plug must be drilled in order to purge and thus avoid malfunctioning of the lubrication system.
2. Serial installation
This is not a common installation, but it is possible depending on the dosing units installed and the space where the installation is to be located.
Dimensional drawing
Order information
El suministro estándar corresponde al dosificador con 6 salidas.
La referencia se forma dependiendo del número de salidas y su posición. Según sea el volumen requerido a la salida (volumen del dosificador), daremos el último digito al dosificador, tal como se muestra en la tabla siguiente.
| LETRA A AÑADIR SEGÚN EL VOLUMEN DEL DOSIFICADOR
|
| 3117 XX 3 X X |
| Número de salidas
|
| 02 |
| 04 |
| 06 |
| 08 |
| 10 |
| Posición de las salidas |
| Superiores 0 |
| Traseras 2 |
| Volumen a la salida (cm³) |
| 0,022 A |
| 0,034 B |
| 0,057 C |
| 0,110 D |
Ejemplo de pedido Referencia
| Distribuidor de 6 salidas con : | |
| Salidas superiores | |
| Con un volumen de salida de 0,110 cm³ |
| 31170630D |
Other products
We will get back to you within 24 hours
Do you have any questions? Are you ready to buy? Your Nortek assistant is ready to help you
Success stories
We are your reliable partner to make everything flow and nothing stands still.
Leave the fluid management of all your machines in our hands so that they always work at 100%, increase their performance and extend their service life. It’s time to stop worrying about the performance of your machinery.
Discover how our solutions have delivered great results