Series 337XXXX

Modular progressive distributor DPM

Distributions of lubrication in industrial machinery, such as roller conveyors, straightening machines or cushions.

Installations in the paper industry, steelworks, and quarries can be used this type of products with high guarantees of a suitable lubrication.

Features

  • Its modular design gives it great flexibility to adapt to different installations.
  • Can be configured as required.
  • Allows different volumes of lubricant to be injected into the different outlets.
  • Can be used with grease or oil.
  • Its internal adjustment guarantees high precision in the injected volume.
  • Progressive and uniform lubrication.
  • Possibility of internal communication of outlets.
  • Robust body in EN 10087-11SMnPb30.
  • High lubrication capacity: availability of progressive lubrication between 6 and 16 outlets.
  • Possibility of incorporating different operational control systems, visual or electrical.

Description

Progressive distributors are elements that allow the division and distribution of lubricant in a controlled and precise way. They take their name from the fact that the lubricant is supplied to the lubrication points in a progressive order. They have a single inlet; the number of outlets depends on the model and configuration.

Progressive distributors operate with pistons, which make a clean and precise distribution of lubricant.

Design and operating principle

The lubricant enters the distributor under pressure. Through the various internal communications, the piston acts on the first plunger, causing the latter to move and thus giving rise to the first division of lubricant towards the first outlet.

Once the first piston has completed its stroke, the movement of the next piston begins and the division and distribution of lubricant towards the second outlet takes place, and so on until the movement of all the pistons is completed. When the last piston has completed its movement, the cycle begins again on the initial piston, but in the opposite direction, with the division and distribution of lubricant to the outlet on the opposite side. This cycle is repeated continuously as long as there is a pressurized lubricant supply.

As all the inner pistons are interconnected, the blocking of a single piston will block the progressive distributor completely. This feature makes it easy to check that the system is operating correctly by adding a detection system on a single piston.

Installation

Progressive distributors can be placed in single line lubrication systems or at the outlet of dosing valves in double line lubrication systems. It is not recommended to place more than two progressive distributors in series.

The lubricant inlet must always be pressurized.

If not all outlets of the progressive distributor need to be used, an outlet bypass is necessary. Refer to the instruction manual to carry out the override correctly and avoid blockage of the distributor.

Specifications

Number of departures From 6 to 16
Outflow per piston From 0.09 cm3 to 1.1 cm3
Minimum work pressure 10 bar
Maximun working pressure 200 bar
Input connection G 3/8
Output connections G 1/4
Qualities Electroplated coating of zinc according to ISO 2081 – Fe / Zn12 / A

 

Order information

It is necessary to choose the base plate and the dosing groups:

BASE PLATE:  ADD CODE DEPENDING ON ASSEMBLY
  DPM- XX X X (-XX)
Outlets          
6 outlets (3+3)   06      
8 outlets (4+4)   08      
10 outlets (5+5)   10      
12 outlets (6+6)   12      
14 outlets (7+7)   14      
16 outlets (8+8)   16      
Operational control          
Without operational control     N    
Visual control     V    
Limit switch     I    
Inductive proximity sensor     D    
Material          
Carbon steel – 11SMnPb30       C  
Stainless steel – X5CrNiMo17-12-2 (AISI-316)       I  
Special code (*)          
For non-standard elements         (-XX)

(*) See section “Output configuration” for more information.

DOSIGN GROUPS:  ADD CODE DEPENDING ON ASSEMBLY
  GDP- XXX
Plunger    
Greaser group 0.09 cm³ (plunger Ø4)   009
Greaser group 0.14 cm³ (plunger Ø5)   014
Greaser group 0.20 cm³ (plunger Ø6)   020
Greaser group 0.35 cm³ (plunger Ø8)   035
Greaser group 0.55 cm³ (plunger Ø10)   055
Greaser group 0.80 cm³ (plunger Ø12)   080
Greaser group 1.10 cm³ (plunger Ø14)   110

 

 

Other products

We will get back to you within 24 hours

Do you have any questions? Are you ready to buy? Your Nortek assistant is ready to help you

Success stories

We are your reliable partner to make everything flow and nothing stands still.

Leave the fluid management of all your machines in our hands so that they always work at 100%, increase their performance and extend their service life. It’s time to stop worrying about the performance of your machinery.

Discover how our solutions have delivered great results