Divinor Ø25

Series 41149XX

Features

• High precision of lubrication.
• Easy assembly.
• Simplicity of the installation.

Description

The mission of this flow dividers patented as “Divinor” by Nortek is to spread out air-oil in several points without using mechanical means.

Although they can be used in any type of industry they have been developed for steel applications, basically for rolling mill chocks.  

Applications

Lubrication of the rolling bearings in rolling mill chocks (previous machining it is necessary).

Design and operating principle

The flow accesses the interior of the “Divinor” through the inlet, entering by the internal divider which is in charge of distributing the flow through both outlets depending on the holes made in both outlets, due to its grooved profile developed by Nortek causes division to be done accurately by both outputs

Installation

It is made by means of a longitudinal hole recommended by Nortek of Ø25 H11 made in the chock in an obstacle-free area with a side of the chock threaded at 1 ”bsp as standard (optionally M30x1.5) and the another side a lubrication hole to seal as well as some drill holes towards the bearing and seals. On the opposite side to the reten to seal, a ¼” bsp Nortek inlet system is placed. Internally, as many “Divinores” will be placed as necessary, placing threaded intermediate extensions as needed. The drill holes are plugged on the outside

Specifications