Air respirator filter

Series 2092110

Features

• Made of galvanised mild and stainless steel
• Easy and prompt maintenance

Aplication

• Prevent dust, water or air from penetrating
• Enable air outlet
• Tanks   >  1000 l

Design and operating principle

Air respirator filters are essential in the design of any confined space to filter the air and prevent impurities from penetrating which may cause greater damage to the lubrication systems. they also allow remove air from confined spaces.

Operating mode consists of conducting the passage of air through a filter, also allowing the inversion of flow in case it is needed due to fluid fluctuations in the tank.        

Description

Air respirator filters are essential in the design of any confined space to filter the air and prevent impurities from penetrating which may cause greater damage to the lubrication systems. They also allow remove air from confined spaces.

Installation

Air respirator filters allows air passage without any restrictions, in both the entry and the exit directions, because of the lack of mechanical components.  Its location is carried out in a free area of internal fluid, usually installed at the top of the tanks or on the highest part of the confined space where the fluid level does not reach, always leaving enough space for maintenance.

In the habitual use, these filters are going clogging because of the impurities that they are retaining. After a time of operation, it is necessary to change it, in order to ensure the quality of the air that inside the tank. In order to guarantee performance, the filters must be checked. NORTEK recommends changing the cartridge for each maintenance check.

The number of filters depends on volume of the tank.

Specifications