Features

• Air and oil with “monoblock” design
• Block design to avoid leakage
• High performance
• Progressive and uniform lubrication
• Internal output communication
• Different operating control systems, visual or electrical by means of micro or proximity
• electrical by means of micro or proximity detector.
• Sturdy body in EN 10087-11SMnPb30
• High lubrication capacity, progressive between 6 and 16 outlets

Aplication

• Lubrication distributions in small or medium industrial machinery, such as roller conveyors, straightening machines or bearings by means of the air-oil system.
• Installations in the paper industry, steel mills, and quarries can be used with high this type of products with high guarantees of an adequate lubrication.

Design and operating principle

The oil inlet acts on the first piston causing its movement, which forces the displacement of the following pistons.
The displacement of the following plungers, providing flow through the outlets and causing its progressive and continuous displacement as long as there is oil supply from the inlet and continuous as long as there is oil supply from the inlet.
the air is mixed with the oil and lubrication is generated.
This progressive displacement allows, depending on the greasing points, to plug the outlets internally to join them externally and unify the greasing.
externally and to unify the greasing on the outside, avoiding annoying external “T” assemblies.
The blocking of a single piston due to lack of oil leads to the blocking of the entire distributor. The solution simply consists in adding a detection system on a single piston to control the whole progressive…

Description

The lubrication of this type of distributor is by air-oil lubrication. Air-oil lubrication consists of a stream of air, usually continuously air stream, usually acting continuously, used to provide cooling at the lubrication point and as a means of conveying small quantities of oil to the lubrication point.
and as a transport medium to convey small quantities of oil to the lubrication point.
Oil injected into the air stream at regular intervals coats the surfaces to be lubricated and reduces friction and wear.
Progressive distributors are of the piston type, which make a clean and accurate distribution of lubricant.
The progressive distributor takes its name from the fact that the lubricant is supplied to the lubrication points in a progressive order.

Installation

They always need to be installed in a secondary distribution air-oil line system, the lubricant inlet is made by a pressure pump that, aided by the air line, distributes the lubricant is provided by a pressure pump which, aided by the air line, proportionally distributes the flow received between the proportionally distributes the received flow among the enabled outlets.

Specifications

Number of outlets 6 to 16
Outlet flow per piston 0,11 cm3
Minimum working pressure 10 bar
Maximum working pressure 200 bar
Air inlet connection 1/8″ bsp
Oil inlet connection 1/8″ bsp
Outlet connections 1/8″ bsp
Qualities Zinc plated ISO 2081 – Fe/Zn12/A