Series 33516XX
Progressive distributor DP11
Distributions of lubrication in industrial machinery, such as roller conveyors, straightening machines or cushions.
Installations in the paper industry, steelworks, and quarries can be used this type of products with high guarantees of a suitable lubrication.
PDF files
Features
- Design in block avoiding leaks
- Oil or grease can be used
- High performances
- Progressive and uniform lubrication
- Internal communication of outlets
- Different operating systems, visual or electrical by means of micro or proximity detector.
- Robust steel body according to EN 10087-11SMnPb30
- Large greasing capacity, progressive between 6 and 26 outlets.
Description
Progressive distributors are elements that allow the division and distribution of lubricant in a controlled and precise way. They take their name from the fact that the lubricant is supplied to the lubrication points in a progressive order. They have a single inlet; the number of outlets depends on the model and configuration.
Progressive distributors operate with pistons, which make a clean and precise distribution of lubricant.
Design and operating principle
The lubricant inlet acts on the first piston causing the movement of it, which forces the displacement of the following pistons, providing flow through the outputs and causing their progressive and continuous movement as long as there is lubricant input from the entrance.
The blockage of a single piston due to lack of lubricant, entails blocking the entire distributor. The solution simply consists of adding a detection system in a single plunger to be able to control all the progressive one.
Installation
For correct operation, the progressive distributor must be located at the beginning of the lubrication line, at the outlet of the pump. They always need to be installed in a progressive pumping system, due to their low flow they are normally used as secondary progressive distributors, the lubricant inlet is carried out by means of a pressure pump to a main distributor proportionally distributing the flow received between the secondary progressives, these in turn distributing the lubricant between the necessary greasing points.
Specifications
| Number of outlets | From 6 to 26 |
| Outflow per piston | 0,11 cm³ |
| Minimum work pressure | 10 bar |
| Maximun working pressure | 200 bar |
| Inlet connection | G 1/8 |
| Outlet connections | Ø 6 |
| Qualities | Electroplated coating of zinc ISO 2081 – Fe/Zn12/A |
Order information
| ADD CODE DEPENDING ON ASSEMBLY | ||||
| DP11- | XX | X | (-XX) | |
| Outlets | ||||
| 6 outlets (3+3) | 06 | |||
| 8 outlets (4+4) | 08 | |||
| 10 outlets (5+5) | 10 | |||
| 12 outlets (6+6) | 12 | |||
| 14 outlets (7+7) | 14 | |||
| 16 outlets (8+8) | 16 | |||
| 18 outlets (9+9) | 18 | |||
| 20 outlets (10+10) | 20 | |||
| 22 outlets (11+11) | 22 | |||
| 24 outlets (12+12) | 24 | |||
| 26 outlets (13+13) | 26 | |||
| Operational control | ||||
| Without operational control | N | |||
| With visual control | V | |||
| With limit switch control | I | |||
| With proximity sensor control | D | |||
| Special code (*) | ||||
| For elements outside the standard | (-XX) | |||
(*) See section “Output configuration” for more information.
Other products
We will get back to you within 24 hours
Do you have any questions? Are you ready to buy? Your Nortek assistant is ready to help you
Success stories
We are your reliable partner to make everything flow and nothing stands still.
Leave the fluid management of all your machines in our hands so that they always work at 100%, increase their performance and extend their service life. It’s time to stop worrying about the performance of your machinery.
Discover how our solutions have delivered great results